Your Construction Equipment Rental and Sales Supermarket With Four Locations Serving Southern Ohio & Northern Kentucky
  • View Your Quote

LAWN & GARDEN

CHIPPER, BRUSH 6"

Where to find CHIPPER, BRUSH 6 in Ashland

Image for reference only
Actual item may look different
Click on image for larger view

Manufacturer: VERMEER

Model: BC700XL

4 Hour: $116.00

Daily: $170.00

Weekly: $562.00

Monthly: $1,702.00

Quantity: for a period of  
4 hour(s)   day(s)   week(s)   month(s)  


Additional Information

  • General Dimensions and Weights
  • Length - Feed Table Up, Tongue In 113 " 287 cm
  • Length - Table Down, Tongue Extended 133 " 337.8 cm
  • Width 71 " 180.3 cm
  • Height 102 " 259.1 cm
  • Weight - Engine Option One 1800 lbs 816.5 kg
  • Tongue Weight - Engine Option One 180 lbs 81.6 kg
  • Engine Option One
  • Make and Model Kohler ECH740
  • Gross Horsepower (Maximum) 25 hp 18.6 kw
  • Torque (Max) 41.7 ft-lb 56.5 Nm
  • Fuel Tank Capacity 6 gal 22.7 L
  • Max Fuel Consumption 2.4 gph 9.1 lph
  • Fuel Type Gasoline
  • Air Cleaner Kohler HD 2-Stage Dry
  • Oil Filter Spin-on
  • Recommended Oil Kohler oil or API CH4/SJ
  • Oil Volume with Filter 2 qt 1.9 L
  • Maximum Angle of Continuous Operation 25 deg
  • Cooling Medium Oil/Air
  • Alternator 20A Charging
  • Clutch Type Centrifugal PTO
  • Clutch Drive Engagement Centrifugal
  • Feed System
  • Feed Roller Orientation Horizontal
  • Feed Roller Clamp Load 525 lbs 238.1 kg
  • Feed Roller Clamp Type Spring/Feed Roller Weight
  • Feed Roller Minimum Distance to Drum 4 " 10.2 cm
  • Feed Roller Dimension 10" Diameter
  • Weight of Feed Roller 100 lbs 45.4 kg
  • Motor Displacement 14
  • Motor Manufacturer White Hydraulics
  • Feed Speed 49.4 ft/min
  • Infeed Table Width 41.2 " 104.6 cm
  • Infeed Table Length 30.2 " 76.7 cm
  • Infeed Hopper Height 22.1 " 56.1 cm
  • Infeed Throat Capacity 6" x 8" (15.24 cm x 20.32 cm)
  • Pinch Point - Distance to End of Feed Table 65.4 " 166.1 cm
  • Distance from Feed Table to Ground 28.1 " 71.4 cm
  • Safety System
  • Bottom Feed Stop Bar Standard
  • Bottom Feed Stop Bar Diameter 2 " 5.1 cm
  • Bottom Feed Stop Bar Material Thickness 12" (30.48 cm)
  • Reset Method Dual green hold-to-run buttons
  • Four Position Feed Control Bar Standard
  • Diameter 2 " 5.1 cm
  • Material Thickness .1 " .3 cm
  • Positions Four position: (E-Stop), Forward, Stop, (Reverse)
  • Green Hold to Run Button Standard
  • Drum/Disc Cutting System
  • Material Capacity 6 " 15.2 cm
  • Width 8 " 20.3 cm
  • Thickness 1.3 " 3.2 cm
  • Diameter 23.9 " 60.7 cm
  • Speed 1748
  • Weight With Shaft 176 lbs 79.8 kg
  • Knife Thickness .6 " 1.6 cm
  • Material A8 Chipper Steel
  • Replaceable Threaded Knife Block Yes
  • Fixture Method Welded
  • Air Flow 5000 cfm
  • Bedknife Size 4" x 8.6"/(10.2 cm x 21.9 cm) hor; 4" x 5.8"/(10.2 cm x 14.6 cm) vert
  • Bedknife Material ASTM A572 Grade 50
  • Cutter Drive Components - Engine Option One
  • Bore 1.5 " 3.8 cm
  • Type Flange-mounted ball type, self-aligning
  • Manufacturer Linkbelt
  • Dynamic Capacity 5640 lbs 2558.3 kg
  • Static Capacity 4460 lbs 2023 kg
  • Belt Idler/Tensioner Spring-loaded adjustable Idler
  • Belt Type 2-band 5-V profile Aramid
  • Discharge System
  • Chute Height 97.2 " 246.8 cm
  • Bottom Thickness .1 " .3 cm
  • Top Thickness .1 " .3 cm
  • Side Wall Thickness .1 " .3 cm
  • Deflector Thickness .1 " .2 cm
  • Chute Rotation Angle 240 deg
  • Rotation Type Manual
  • Rotational Lock Standard Latch
  • Hydraulic System
  • Tank capacity 6.8 gal 25.7 L
  • Recommended Oil Type Vermeer VMF Gold
  • System Type Open center
  • Filtration Method Return flow filtration, 10 micron
  • Pump Flow at Maximum RPM 3.8 gpm 14.4 L/min
  • System relief pressure 2500 psi 172.4 bar
  • Electrical System
  • System Voltage 12 Volt
  • Battery Group 26, 400 CCA
  • Standard Gauges Hour meter
  • Switches Hold-to-run, sensitivity selector
  • Controller Vermeer ACS CB02
  • Chassis
  • Frame Description 3/16"/(.5 cm) ASTM A1011 steel
  • Hitch Type 2"/(5.1 cm) ball coupler
  • Fender Description .1"/(.3 cm) Steel bolt-on
  • Axle/Suspension 2000 lb/(907.2 kg) rubber torsion axle
  • Type - Option One Rubber Torsional
  • Manufacturer - Option One Dexter
  • Capacity - Option One 2000 lb/(907.2 kg)
  • Tires - Option One ST185/80D13 load range D
  • Wheels - Option One 13 x 5, bolt circle 5 on 4.5
  • Axle/Suspension - Option Two 2000lb/(907.2 kg) rubber torsion axle with electric brakes
  • Type - Option Two Rubber torsional, braked
  • Manufacturer - Option Two Dexter
  • Capacity - Option Two 2000 lb/(907.2 kg)
  • Brake Type Electric optional
* Prices and availability are subject to change without notice. Sales tax, delivery and other fees are not included in this price estimate.
* Please call us with any questions about our chipper brush 6 inch rentals in Ashland, KY, Southern Ohio, and Northern Kentucky.